Product Description:
Lobrid Technology. Concentrated antifreeze (down to -50°C / -58°F) developed to meet the requirements of G13 standard (TL VW 774J) recommended by the VAG group. Compatible with coolants that meet the former specifications: G12, G12+ and G12++. Protection against freezing, corrosion, and scale. Optimum protection of aluminum at high temperatures.
Type Of Use
MOTUL INUGEL G13 ULTRA is a concentrated antifreeze that must be mixed with soft water for immediate use as a cooling liquid, based on monoethylene glycol and glycerol, using Lobrid additives technology.
Especially recommended for cooling systems of VAG group passenger cars and light duty vehicles when coolant meeting requirements of G13 standard (VW TL 774 J) is required.
Performance
Standards And Manufacturer Specifications: G13 (VW TL 774 J)
Contains a bitterness agent to prevent from drinking: coolants and antifreezes have a sweet taste but are harmful.
Optimal protection of VAG group engine cooling systems. The Lobrid technology brings optimal protection for all engine metallic parts including aluminum and non-ferrous components. High performance additives protects against freezing, overheating, corrosion and scale.
This Lobrid technology meets the requirements of G13 (VW TL 774 J) specifications and is compatible with coolants meeting former specifications: G12 (VW TL 774 D), G12+ (VW TL 774 F), G12++ (VW TL 774 G).
Provides aluminum reinforced protection at high temperature. Eliminates the risk of scaling and deposits in the cooling system. Avoids cavitation and increases water pump lifetime.
Compatible with gaskets, hoses, and plastic components. Can be mixed with ethylene glycol based coolants.
Recommendations
Do not use pure product. Dilute with soft water according to the required freezing protection: see table.
To maintain anti-corrosion properties, do not dilute below 33% of antifreeze.
For optimal cooling effect, do not dilute above 66% of antifreeze.
To be used for top-up or complete renewal of the cooling circuit for improved efficiency.
Water for dilution: if possible use soft water (maximum hardness 35°F and chlorides and sulfates maximum contain 500 ppm).
Drain intervals: Refer to the manufacturers' recommendation.
Attention, control or drain the coolant only when the engine is cold.
Can be mixed with ethylene glycol based coolants.
This product should not be used to protect drinking water systems against freezing.
View All
