Indore, Madhya Pradesh 
GST 23BAHPS6461H1ZI
We provide wide range of Hydraulic Shreaing Machine which facilitate distortion and burr free shreaing of Mild Steel (M.S) OR Stainless Steel (S.S) sheets . These machines are easy to operate with reliable hydraulics, Cylinders are mounted on top side of machine for better strength and stability. Further good hildings by hydraulic hold down before shreaing eliminates slippage of sheets.Capacity: 4MM TO 25 MM4 mm thick MILD STEEL (M.S)plate up to 25 mm thick M.S Plate. the standard cutting length is 2500 mm and 3050 mm, longer machines up to 6300 mm can be manufactured as per customer requirement.Numerically Control (Nc) vs Conventional Hydraulic Shreaing Machine- The DifferenceA) NCHydraulic Shreaing: Back Gauge is numerically conrolled through AC Servo motor and Drive, complete machine is controlled through highly reliable PLCConventionalHydraulic Shreaing: Back gauge is manually operated from rear side of the machine. 2 people are needed to set the back gauge, one for operating the gauge and another for verifying the gauge position.B)NCHydraulic Shreaing:All operation are through 7" full color touch screen. Machine can also be operated from foot switch.ConventionalHydraulic Shreaing: Relatively simple panel is used with replay logic. Only two options are available, manual and quto mode.C)NCHydraulic Shreaing: You can create the cut plan, wherein, the auto back gauge (servo motorised) will automatically go to the desired position, as you have mentioned in the program.ConventionalHydraulic Shreaing:No such option is availablle, since the back gauge is manually operated and set.D)NCHydraulic Shreaing: The rake angle will be set automatically, once it is set in particular program (this will be needed, when you switch between thinner and thicker material frequently)ConventionalHydraulic Shreaing:Rack angle has to be set manaually, as desired, it can be set using a selector switch provided on the control panel.
| Suitable For Welding Rod: |
3-4mm |
| Operation Mode: |
Semi-Automatic |
| Material to be Sheared: |
Iron, Stainless Steel, MILD STEEL |
| Cutting Material: |
Stainless Steel, MILD STEEL |
| Max Shear Width: |
2500 MM |
| Operation Mode: |
Semi-Automatic |
| Suitable For Welding Rod: |
3-4mm |
| Material to be Sheared: |
Stainless Steel, MILD STEEL |
| Cutting Material: |
Stainless Steel, MILD STEEL |
| Max Shear Width: |
2500 MM |
| Suitable For Welding Rod: |
6 MM |
| Automation Grade: |
Semi-Automatic |
| Back Guage Manual: |
MANUAL |
| Maximum Rake Angle: |
0.5-3 |
| Shearing Thickness: |
6 MM |
| Operation Mode: |
Semi-Automatic |
| Suitable For Welding Rod: |
8 MM |
| Material to be Sheared: |
MILS STEEL, Stainless Steel |
| Max Shear Width: |
2500 MM |
| Max Shear Thickness: |
8 MM |
| Operation Mode: |
Semi-Automatic |
| Automatic Grade: |
Semi-Automatic |
| Material: |
MILD STEEL |
| Material to be Sheared: |
Stainless Steel, MILD STEEL |
| Max Shear Width: |
3050 |
| Automatic Grade: |
Semi-Automatic |
| Operation Mode: |
Semi-Automatic |
| Material to be Sheared: |
MILD STEEL, Stainless Steel |
| Material: |
MILD STEEL |
| Max Shear Width: |
2500 MM |
| Operation Mode: |
Semi-Automatic |
| Automatic Grade: |
Semi-Automatic |
| Material: |
MILD STEEL |
| Material to be Sheared: |
MILD STEEL, Stainless Steel |
| Max Shear Width: |
3050 |
| Operation Mode: |
Semi-Automatic |
| Automatic Grade: |
Semi-Automatic |
| Material: |
Mild Steel |
| Material to be Sheared: |
Stainless Steel, MILD STEEL |
| Max Shear Width: |
2500 MM |
| Automatic Grade: |
Semi-Automatic |
| Operation Mode: |
Semi-Automatic |
| Material: |
Mild Steel |
| Material to be Sheared: |
Stainless Steel, MILD STEEL |
| Max Shear Width: |
3050 |
| Length: |
3050 |
| Operation Mode: |
Semi-Automatic |
| Material to be Sheared: |
Stainless Steel, MILD STEEL |
| Cutting Material: |
Stainless Steel, MILD STEEL |
| Max Shear Thickness: |
3-4 mm |
| Operation Mode: |
Automatic |
| Length: |
2500 MM |
| Material to be Sheared: |
MILD STEEL, Stainless Steel |
| Cutting Material: |
Stainless Steel, MILD STEEL |
| Max Shear Thickness: |
6 MM |
| Length: |
3050 MM |
| Operation Mode: |
Automatic |
| Suitable For Welding Rod: |
6 MM |
| Material to be Sheared: |
MILD STEEL, Stainless Steel |
| Cutting Material: |
Stainless Steel, MILD STEEL |
| Operation Mode: |
Automatic |
| Suitable For Welding Rod: |
8 MM |
| Length: |
2500 MM |
| Material to be Sheared: |
Stainless Steel, MILD STEEL |
| Cutting Material: |
MILD STEEL, Stainless Steel |
| Length: |
2500 |
| Operation Mode: |
Automatic |
| Material to be Sheared: |
Stainless Steel, Mild steel |
| Cutting Material: |
MILD STEEL, Stainless Steel |
| Max Shear Thickness: |
10 MM |
| Length: |
3050 MM |
| Operation Mode: |
Automatic |
| Material to be Sheared: |
Stainless Steel, MILD STEEL |
| Max Shear Thickness: |
10 MM |
| Cutting Material: |
Stainless Steel, MILD STEEL |
| Length: |
2500 |
| Suitable For Welding Rod: |
12 MM |
| Material to be Sheared: |
MILD STEEL, Stainless Steel |
| Max Shear Thickness: |
12 MM |
| Max Shear Width: |
2500 MM |
| Length: |
3050 MM |
| Operation Mode: |
Automatic |
| Material to be Sheared: |
Stainless Steel, MILD STEEL |
| Cutting Material: |
MILD STEEL, Stainless Steel |
| Max Shear Thickness: |
12 MM |
| Operation Mode: |
Automatic |
| Length: |
3050 MM |
| Material to be Sheared: |
MILD STEEL, Stainless Steel |
| Max Shear Thickness: |
15 MM |
| Cutting Material: |
Stainless Steel, MILD STEEL |
| Operation Mode: |
Automatic |
| Length: |
3050 MM |
| Material to be Sheared: |
Stainless Steel, MILD STEEL |
| Max Shear Thickness: |
8 MM |
| Cutting Material: |
MILD STEEL, Stainless Steel |
| Automatic Grade: |
Semi-Automatic |
| Operation Mode: |
Semi-Automatic |
| Material to be Sheared: |
MILD STEEL, Stainless Steel |
| Material: |
Mild Steel |
| Max Shear Width: |
3050 |
Esskay Lathe And Machine Tools MS-2B, G-11, New Siyaganj Indore, Madhya Pradesh, India, 452001
Dheeraj Shori (Director)
