Product Description:
Generally The Mechanism Has Been Reselected With Latest Technology To Increase Efficiency, And Run The Machine Are Interchangeable. All Bore Are Very Closely Reamed, Double Ball Bearing Are Fitted In Disc Arm, At Its Connection With The Disc, The Main Crank-Shaft Runs In Heavy Duty Taper Roller –Bearing.
The bed: is of heavy dimension provided with guide way for the vice, to clamp the work pice. One jaw of the vice is fixed while the other is adjusted according to the material diameter.
Saw frame: is of rigid construction and runs in prismatic guide insuring a square and parallel cut. The cut takes place on draw stroke, and the blade, and cut all types of metal which are machinable of all strength.
Feed: Two levers are provided at the dash-pot. The small lever regulates the rate feed, while the other big one enables the slide to start cutting or to be raised the slide automatically, on completion of the cutting cycle and the motor switched off automatically.
Speed: A Two speed drive mechanism is incorporated for the selection of the most suitable speed for the material being cut. Cooling the machine comes with a very reliable and efficient centrifugal pump, for quick cooling the Blade. It comes with connection pipes from water tank to stay put on the work pice. The pump is driven by a intermediate drive. STANDARD: All machines are supplied with centrifugal water pump, Motor-pully Motor-plate, but without Accessories ‘V’ belts and Electricals.
Extra: Angular vice simple, Angular vice with Graduation, Electric-motor and starter, ‘V’ belts Blades.
Accessories direct on line push-button. Starter can be incorporated which sets into motor an adjustable trip mechanism which stops the machine as soon as the blade is clear from work. The non-productive time is reduced to minimum.
View All
