Product Description:
Price Range: Rs.1lakh - Rs.1crore Other...Product Description:
Price Range: Rs.1lakh - Rs.1crore
Other information:
MASCOT CR Series Hydraulic motor is reliable for Heavy duty high torque low speed applications. These hydraulic motors are mostly working in mines and steel sectors, where continuous duty cycle with high efficiency on varying load conditions is demanded.
This manual provides the necessary information for installation and maintenance of hydraulic motors, however the development hydraulic motor is a continuous process as we therefore reserve the right to introduce amendments in the manual as we deem necessary without notice and obligation.
Technical Information:
MOTOR FRAME SIZE
SPECIFICATION
Displacement
Torque Per rev
Speed
Rated
Speed
Max
Max Pressure
Metric
Litres
Cu.in
Ft.lb / 100psi
Nm/bar
RPM
RPM
BAR
PSI
CR6.7
6.8
418
108
108
95
175
350
5000
Mounting Instructions:
The motor is normally filled with oil up to the shaft centre. If the oil tank is positioned above the shaft centre, the oil level will raise a corresponding amount
It is recommended that drainage is arranged so that the motor is completely filled with oil. The motor must always be connected so that sufficient charge pressure is obtained at the low pressure connection. This is especially important at high speed and with rapid reversing. The drain port "D" must be connected directly to the tank in order to avoid exceeding the maximum permitted case pressure
Features:
High torques:
Our CR Motor series is high torque low speed motor ,which can be mounted directly on shaft without intermediate gears. This provides many practical benefits which appeal to the users of the equipment
Variable speed control:
CR Motor can drive in both directions with variable speed by smoothly controlling the flow of oil in the circuit.
High efficiency
Low speeds