Product Description:
Product Description
CRC BELT GRIP:
GENERAL DESCRIPTION
Slippage prevention for all types of belts.
CRC Belt Grip is a synthetic polymer based formulation that meets the demands for an industrial and food processing plant belt dressing. It extends the life of belts and pulley bearings by improving traction and allowing runs under reduced belt tension.
FEATURES
Prevents slippage on flat, round and V-belts.
Adheres strongly to any belt material.
Gives extra pulling power, enhances transmission efficiency.
Reduces squeaking noise caused by belt slipping.
Forms a tacky, non-drying, water-resistant, chemically stable film. Compatible with all commonly used
types of belt materials (rubber, leather, fabrics, ...) Aerosols are equipped with a 360° (upside-down)
spray valve and provided with an extension tube for added convenience. Pressurised with CO2 propellant, giving an active product content of 97%. Dry film meets FDA regulation CFR 21-178.3570
for incidental food contact.
APPLICATIONS
Eliminates slippage in flat, round or V-belts made out of rubber, leather, fabrics, plastic,... used in Compressor
Pump
Generators
Fans
Motors
Automobiles
Lift trucks
Conveyors
Industrial machinery
DIRECTIONS
Turn off equipment and stop belts before applying.
Spray a light, even coating on pulling sides of belt (i.e. sides that come in contact with pulleys); let solvent evaporate before re-energising equipment.
Re-apply occasionally to ensure continued high performance.
Removal, if necessary, by CRC Fast Dry Degreaser or CRC Industrial Degreaser (test compatibility with rubber and plastic prior to use).
A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.
CRC Belt Grip is a synthetic polymer based formulation specially developed to meet the demand for a true industrial and automotive food grade belt dressing. It adheres strongly to any commonly used belt material and forms a tacky, non drying, water resistant film that extends belt life by improving traction and reducing belt tension, slipping and dirt build-up. Belts remain pliable and will not glaze or harden while squeaking noise will be reduced.
CRC Belt Grip is designed to be used on leather, rubber, canvas or fabric and is ideally suited for flat, round and V-belts. Not suited for use on multi-V-belts.
Features & Benefits
Tacky, non drying, water resistant film – Minimises drive belt slippage, resists water wash off, maintains belt flexibility and prevents loads from slipping on conveyor systems
Improves traction and reduces belt tension – Relieving stress on motors, shafts and wheels for improved operating efficiency and extended belt life
Colourless – Will not stain finished goods transported on conveyor systems
Suitable for most belts and belt material – Flat, round or V belts. Leather, rubber, canvas or fabric
Not suitable for multi-V-belts
Indoor and outdoor use – Even in difficult hot and/or humid conditions
No known ozone depleting chemicals
MPI Approved C12
Includes Permastraw™ Dual-Action Spray System - One piece actuator with two-way spray that ensures that straw stays in place
Uses
Recommended for use in industrial machinery, conveyor systems, portable motorised equipment and vehicle belts
Compressors, pumps, generators, fans, motors, automobiles, lift trucks
Designed to be used on leather, rubber, canvas or fabric and is ideally suited for flat, round and V-belts. Not suited for use on multi-V-belts.
View All
