Product Description:
Royal ST Cut 55
Royal ST Cut 55 is recommended at locations where the surface finish requirements are rigid and the productivity is of prime importance. It has proved its effectiveness over a wide range of metal alloys including stainless steels, high tensile steels and heat resistant alloys.
Royal ST Cut BR Oils
Both Royal ST Cut BR-103 & Royal ST Cut BR-105 offer satisfactory performance over a wide range of machine tools speed and depths of cuts. Royal ST Cut BR-105 which meets IS:3065:1985 type 3 Grade III is more potent then Royal St Cut BR-103 which meets IS:3065:1985 type 3 Grade II and has therefore been found more effective in Automats.
Royal ST Cut Oils
Royal Non-corrosive Straight Cutting Oils are marked in the following grades.
Royal ST Cut 12 is neat cutting oil blended from high Viscosity Index base oils. It is recommended for use of an economical replacement of soluble cutting oils for obtaining a better finish on ferrous and non-ferrous metals.
Royal ST Cut 13 offers better cutting and cooling properties since it is fortified with adequate dosage of sulphurised oiliness additives.
Royal ST Cut 14 is formulated with chlorine and oiliness additives. It thus offers better performance as compared to Royal ST Cut 13. It meets IS:3065:1985 Type 2 Grade II requirements. Water entry into the system should be prevented. Recommended for surface and flute grinding of hardened parts.
Royal ST Cut 14 A is formulated with chlorinated organic additives as well as oiliness additives. Because of its higher viscosity it withstands heavier loading resulting in higher productivity. Avoid ingress of water into such systems.
Royal ST Cut 14 B is an all purpose cutting oil suitable for various operations on both hard and soft materials. It is formulated with treated fat and chlorine to give extreme pressure properties for low & high temperature cutting operations. Ingress of water in systems with Royal ST Cut 14 B should be avoided.
Royal ST Cut 14 P2 SC is blended with a specially selected fatty acid which helps it perform in ardous conditions and provides to fine finish to the job. It meets IS:3065:1985 Type I Grade III.
Royal ST Cut 14 P3 SC is a non staining type of neat cutting oil suitable for multiple operations involving very severe metal grinding processes such as flute grinding of Drills, Reamers and other Form-Grinding Tools. It may also be used for Cold die Forging of bolt-heads. It meets requirements of IS:3065:1985 Type 2 Grade III
Royal ST Cut 14 P4 SC is general purpose neat cutting oil suitable for use in automats used for precision machining in the antifriction bearing manufacturing industry.
Additional Information:
Delivery Time: 7 days
View All
