Product Specification:
Configuration | Part-Time |
High Range | 1 : 1 |
Low Range | 2.64 : 1 |
Product Description:
Like its mechanical and electrical counterpart, the Double-Offset Transfer Case (DOTC) is typically...Product Specification:
Configuration | Part-Time |
High Range | 1 : 1 |
Low Range | 2.64 : 1 |
Low Range Configuration | Helical 6 Pinion |
Offset | Right / Left / Center |
Lube System | Gerotor Pump |
Fluid Type | ATF |
Housing Material | Aluminium |
Dry Weight (Kg) | 60 |
Fluid Capacity (L) | 3.0 |
Typical GVW Rating (Kgs) | 4000 - 5000 |
Shift Control | Selector Switch |
Shift Pattern | 2H - 4H - 4L |
Product Description:
Like its mechanical and electrical counterpart, the Double-Offset Transfer Case (DOTC) is typically installed in part-time four-wheel-drive off-road vehicles such as trucks, rock-crawling vehicles and commercial vehicles. The DOTC is designed with a 16-bit/32-bit CAN-enabled Electronic Control Unit (ECU) that enables selection between 2WD and 4WD as well as between high and low gear ranges through an electrical switch. The reduced propeller shaft angle achieved from the double-offset design makes it suitable for it to be offered as a 4x4 option on vehicles with a smaller wheelbase.Features:
Part-time system allows driver to select two or four-wheel drive operation.
Lightweight construction reduces total vehicle weight to enhance fuel use efficiency.
HY-VQCI!I Chain-driven output provides quiet, four-wheel drive operation.
Positive displacement oil pump and filter assures full lubrication when driving or towing.
Helical gearing delivers quiet, high & low-range operation.
Four-wheel drive indicator light switch indicates four-wheel drive mode for driver convenience.
Electric shift/Single lever shift control simplifies selection of transfer case operating modes.