Product Description:
In order to retain our goodwill in this industry, we are providing a latest array of Heavy Duty Steel Manual Tensioner With Cutting Attachment .
Features:
Heavy duty windlass type Manual Steel Strap Tensioner
Easy to operate and maintain
Base is Aluminium Bronze casting
Movable parts are made from high grade alloy steel and heat treated
Precut strap used
Useful for unitizing of objects in wagon, container, truck & ship lashing etc.
Shearing attachment fitted in front of the tool for cutting the strap after Tensioning.
Operational Manual:
Pull the strap from the coil & cut the strap as required length
Apply the strap around the package
Then insert one end of the strap into the seal in such a way so that flat surface of the seal remains facing outside the strap
Other end of the strap insert through the seal. Then hold the overlap portion of the straps with your left hand
Hold the tool by right hand. Insert bottom strap under the gripper of the tool. Pull the handle lock lever to grip the strap by the gripper
Adjust the windlass shaft in such a way so that the slot should be parallel with the base. Insert the top strap into the slot
Move the tensioning handle up & down until the proper tension achieved
Seal the strap by using the recommended Sealer
Cut the wounded strap by pulling up the cam handle which is fitted in front of the tool
Unlock the gripper by pressing down the tensioning handle
Safety Instructions:
Before using the tool, read the operating instructions carefully
Wear hand gloves, safety shoe, Helmet, goggles during operation
Do not stand in line with the strap while it is tensioned. The strap may break
Do not put your fingers into the windlass shaft & gripper area
Do not put your hand under the strap on the job while strap is being tensioned
Only use equipment recommended for the strap.`HTUS-50C´ is recommended only for 1.10 mm to 1.27 mm thick. X 31.75 mm width
Additional Information:
Item Code: HTUS-50C
View All
