Product Description:
We hold expertise in offering our clients a qualitative range of Manual Strap Cutter at very nominal price.Features: Light duty steel strap cutter Unique Design Easy to operate & maintain Less cutting pressure required due to special ground profile of cutting edges Cutting edge hard faced with Cobalt alloy which enables the cutter to cut 31.75 x 1.0 mm High tensile strap Longer life as cutting edges are ground finish Specification:
| Strap Thickness |
up to 1.0 mm/0.040” |
| Strap width |
up to 31.75 mm/11/4” |
| Grade |
Regular Duty or High Tensile |
| Weight |
0.750 kg / 1.65 lb. |
| Dimension (L X W X H) |
290 mm x 50 mm x 66 mm (11.4” x 2”x 2.6”) |
Operational Manual:
Place one gloved hand on the strap and position yourself so that you are not in the path of the strapping
Cut the strap several inches away from your hand
The cut should be made so that the flying strap is too short to reach any part of the body
Strapping should be cut squarely, not at an angle to avoid sharp strap edge
Immediately dispose of all strapping to avoid accidents and injury Safety Instructions: Wear your safety shoes, gloves,Helmet and safety glasses at all times Remove oil or grease from your hands, tools and from the floor and area where you will be working Use proper cutting tool as per type, size of the strap to be cut Keep fingers way from areas that can pinch or cut. These areas are located at the front of the tool Only use equipment recommended for the strap `SC-35` is recommended only for (0.25-1.0 ) mm thick. x (9.5-31.75) mm wide strap Additional Information: Item Code: SC-35
View All
