Product Description:
VC1.1
Parting locks are used in moulds for pulling the plates to a desired limit.They act like pullers. The unique design and selection of right material makes the performance of application more better.
Guidelines to use Parting lock:
Place the Parting lock bolt on moving side of the mould
Install min. 4 Pcs. on one mold, 2 Pcs. each on both sides of the plate
After placement of the Parting locks on the plate, turn the bolt to 900 and plastic lock will expand
Do not apply any lubricant on plastic part. Doing so will reduce the friction and grip
Use H7 Reamer in hole of the mold plate with +0.1 mm range
Mould weight < 100 kgs, use 4 Pcs. of VC1.1/12 x 20
Mould weight < 500 kgs, use 4 Pcs. of VC1.1/16 x 25
Mould weight < 1000 kgs, use 4 Pcs. of VC1.1/20 x 30
If more load to be pulled then above limit then use more numbers of Parting locks to be used. i.e. 6 or 8Pcs
View All
