Product Description:
KX is a double acting X-ring with special design lip to be used both for rod and piston applications.
APPLICATION
Hydraulic and pneumatic valves, light duty cylinders, flanges and heavy duty applications.
MATERIAL CODE
NBR 70 SHORE A NB7001
OPERATING CONDITIONS
MEDIA Mineral oils(DIN 51524) HFA and HFB HFC
TEMPERATURE -30°C +5°C -30°C
+105°C +60°C +60°C
SPEED ≤0.5 m/sec ≤0.5 m/sec ≤0.5 m/sec
SURFACE ROUGHNESS Ra Rmax
Sliding Surface ≤0.6 μm ≤3.2 μm
Groove Base ≤2.5 μm ≤10 μm
Groove Flanks ≤5 μm ≤18 μm
INSTALLATION
X-ring is assembled into the groove by hand. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the seal must be oiled with system oil.
PRODUCT ADVANTAGES
Can be used both for reciprocating and rotating hydraulic applications
Low friction compared to o-rings
No tool parting line on the dynamic surface
No twisting in the groove
Both for rod and piston application
Economical sealing solution at low pressures
View All
