Product Specification:
Material | rubber |
Color | any |
Usage/Application | industrial |
Product Description:
K01 is a seven piece single acting sealing set which consists of one should be cut with 45°...Product Specification:
Material | rubber |
Color | any |
Usage/Application | industrial |
Shape | Round |
Dimensions | any |
Customization | yes |
Product Description:
K01 is a seven piece single acting sealing set which consists of one should be cut with 45° angle and staggered by 75° angle at reinforced cotton fabric backup ring, one thermoplastic header installation. When strongly squeezed, the flexibility of the sealing ring, three reinforced cotton fabric middle rings, and two set may be substantially reduced. This could cause excessive elastomeric nitrile rubber middle rings.
INSTALLATION
Being assembled in adjustable housing, the groove housing should have an adjustability of 7.5% of the seal height. If there is a requirement of being used in closed housings, individual partsfriction force, high wear and vibrated operating under low pressures. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation all individual parts of the seal must be oiled with system oil.
APPLICATION
Used especially in hard working conditions such as iron and steel industry, mining equipment, marine hydraulics, scrap cutters and special cylinders where the actual conditions are difficult to predict.
MEDIA Mineral oih HFA and HFC (DIN 515241 HFB
TEMPERATURE •30°C +5°C .30°C +105°C +60°C +60°C
PRESSURE 5400 Bar 5400 Bar 5400 Bar
SPEED 505 ra/sec 505 m/s. 50.5 m/sec
Product Advantage:-
Adjustable seal housing height doe to the reason of being used in open grooves.
Function even with poor surface
Robust seal
Easy installation and removal
Long service life
Able to work till the maintenance of continuity systems because of the adjustable housing.
Very good sealing performance both in high and low pressures